Signs Your Heating System Needs Repair
The heating side of a system can sit unused for months. Small faults often show up the first time you switch the thermostat to heat during the sunnier, less humid stretch from November through April. Watch for these signs:
A burning or electrical smell that won't go away, or a breaker that keeps tripping, is a reason to turn the system off and call. Don't keep resetting it. Catching a heating problem early also matters because the same equipment handles your cooling for most of the year.
- Air from the vents feels cool or barely warm after the system has run for several minutes
- A burning smell that lasts longer than the first few minutes of the season, when dust on the heat strips normally burns off
- The breaker trips when the heat comes on
- The heat pump's outdoor unit runs nonstop or won't start in heat mode
- Buzzing, clicking, grinding or rattling from the indoor or outdoor unit
- The thermostat shows auxiliary or emergency heat most of the time
- Electric bills jump more than usual during a cool spell
- Ice stays on the outdoor coil and doesn't clear
What We Check During a Heating Repair
Our technicians start with the problem you describe, then test the system as a whole. In a heat pump, heating and cooling share many of the same parts, so a fault on one side can affect the other. A typical diagnostic includes:
Coastal air is hard on outdoor equipment, so we look closely for corroded terminals, coil fins and cabinet hardware. If we spot something that will affect cooling later, we tell you about it while we're there.
- Thermostat settings and wiring, and whether the thermostat is set up for your type of equipment
- The reversing valve, which switches a heat pump between cooling and heating
- Heat strip elements, sequencers, relays and limit switches
- Capacitors, contactors and fan motors on the indoor and outdoor units
- Refrigerant pressures and signs of leaks
- Defrost controls and sensors
- The air filter, blower and indoor coil
- Electrical connections, including corrosion from salt air
Repair or Replace?
Many heating problems come down to one failed part, such as a weak capacitor, a burned-out heat strip, a bad sequencer or a stuck reversing valve. These are usually straightforward repairs. Replacement is worth discussing when the problem is a major one, like a failing compressor or a large refrigerant leak in an older unit. It's also worth considering when the system needs repairs again and again.
We explain your options in plain terms: what's wrong, what the repair involves, and what replacement would look like for your home. You make the decision, and we don't push either one.
If you're thinking about replacement, Florida Power & Light runs a Residential HVAC program. It offers rebates on qualifying high-efficiency central air conditioners and heat pumps, applied through participating contractors at the time of installation. We confirm the current terms before including them in any quote. The federal Energy Efficient Home Improvement Credit applied only to qualifying heat pumps placed in service before December 31, 2025, so it isn't available for new installations.
What Affects the Cost of Heating Repair
Every heating repair is different, and we go over the price with you before any work starts. The main factors are:
Routine maintenance, including a heating check before the cooler months, can catch worn parts before they fail and cost more to fix.
- Your type of system: a heat pump, an air handler with heat strips, or both
- Which part failed and whether it's readily available
- How many parts are affected, since one failure can damage another
- How easy the equipment is to reach, such as in a closet, attic or rooftop location
- Whether refrigerant work is needed
- The age and overall condition of the system
How a Heating Repair Visit Works
Here's what to expect when you schedule heating repair with ComfortPro HVAC Services:
Before we arrive, make a note of when the problem started and clear a path to the indoor and outdoor units. Also check that the thermostat is set to heat and has working batteries, if it uses them. If you smell something burning, turn the system off at the thermostat until the technician gets there.
- You contact us and describe the problem, including any smells, sounds or thermostat messages
- We set up a visit at a time that works for you
- The technician asks you about the problem, then inspects and tests the system
- You get a clear explanation of the problem, your options and the pricing before any work begins
- With your approval, we make the repair and test the system in both heat and cool modes
- We go over what we did and point out anything you should keep an eye on
