How Surfside Homes Are Usually Heated
In Miami-Dade County, very few homes have a furnace. Most single-family houses and condo units in Surfside use a heat pump, which is a central air conditioner that can run in reverse. In cooling mode it pulls heat out of your home. In heating mode a part called the reversing valve flips the flow of refrigerant so the system pulls heat from the outdoor air and moves it inside.
Many systems also have electric heat strips inside the air handler. These are coils that glow hot, like a toaster, and kick in when the heat pump needs help or during defrost. Some older homes rely on heat strips alone. Knowing which setup you have tells us where to start looking.
Common Heating Problems We Find
Because heating mode sits unused for most of the year, parts that only work in winter can fail quietly. These are the issues we see most often:
- Reversing valve stuck in cooling position, so the system blows cold air in heat mode
- Burned-out heat strip elements or a tripped high-limit switch
- Breaker for the heat strips tripped or turned off during the summer
- Thermostat set to the wrong system type, or a failed wire between the thermostat and air handler
- A burning smell when heat first runs, usually dust on the heat strips, though it can also signal a wiring problem
- Outdoor unit not running in heat mode because of a bad capacitor, contactor, or defrost control
- Low refrigerant from a leak, which weakens both heating and cooling
Why Salt Air and Humidity Matter Here
Surfside sits on a barrier island between the ocean and the bay, so outdoor units are exposed to salt air all year. Salt corrodes electrical connections, coil fins, and the small control boards that manage defrost and reversing. A connection that's slightly corroded may still carry enough current for cooling but fail under the extra load of heat strips.
Miami Beach area weather adds to the wear. The wet season from May through October brings heavy afternoon storms, and hurricane season runs June 1 through November 30. Storm surges in power and standing water near outdoor units can damage components that you won't notice until you ask the system to heat. When we repair a heating problem, we also check for corrosion and storm-related damage so you're not calling us again a week later.
Repair or Replace?
Most heating problems are repairable: a valve solenoid, a heat strip, a sequencer, a capacitor, or a thermostat. We explain what failed and what the fix involves before we do the work.
If your heat pump is older, leaking refrigerant, or has a failing compressor, replacement may make more sense. Florida Power & Light offers rebates on qualifying high-efficiency central air conditioners and heat pumps through participating contractors at installation, and we confirm the current terms before including them in any quote. Note that the federal tax credit for heat pumps only applied to systems placed in service before December 31, 2025, so it isn't available for new installations now.
What to Expect From a Visit
Our technician starts by confirming how your home is heated, then checks the thermostat, breakers, air handler, heat strips, and outdoor unit. We test the reversing valve and measure temperatures at the supply and return vents to see whether the system is actually producing heat.
Before you call, it helps to check that the thermostat is set to Heat, the filter isn't clogged, and no breakers are tripped. If those look fine and you're still getting cold air, we'll take it from there. We also serve neighbors in Bay Harbor Islands, North Bay Village, North Miami, Sunny Isles Beach, and North Miami Beach.
