What "Furnace" Usually Means in a North Bay Village Home
In Miami-Dade County, heating equipment is built into the same system that cools your home. In many condos and apartments, a closet air handler holds a bank of electric heat strips. When the thermostat calls for heat, those strips warm up and the blower pushes the warm air through your ducts.
Other homes use a heat pump. It pulls heat from outdoor air and moves it inside, and it usually has backup heat strips for colder mornings. A smaller number of older single-family homes still have a gas furnace. We start every visit by finding out which type you have, because each one fails in different ways.
Heating Problems We Fix Most Often
These are the problems we see most often when North Bay Village homeowners switch to heat for the first time in months:
- Blower runs but the air coming out is cool, often from a failed heat strip element, sequencer or relay
- Burning smell on first use, usually dust burning off the strips, though sometimes a sign of an overheating part
- Breaker trips as soon as heat comes on, which can point to a shorted element or a loose, corroded connection
- Heat pump blows cold air in heat mode because of a stuck reversing valve or a refrigerant problem
- Thermostat set to heat but the system never responds, caused by wiring, settings or a failed control board
- Gas furnace that won't light or shuts off after a few minutes, often a dirty flame sensor or a bad igniter
Why Heat Fails After Months of Sitting Idle
Miami Beach-area homes run air conditioning for most of the year. The wet season from May through October brings heat, humidity and daily afternoon storms. Your heat strips may go untouched the whole time while dust settles on them and humid air works on the electrical connections.
The Atlantic hurricane season runs from June 1 to November 30. Storm outages and power surges can damage control boards and sequencers without anyone noticing until the heat is switched on. That's why we suggest testing your heat in November, before you actually need it. Run it for ten minutes. If you notice a smell that doesn't fade, weak airflow or no warm air at all, call us.
What Happens During a Repair Visit
We check the thermostat first, then the air handler, the electrical supply and the outdoor unit if you have a heat pump. We measure the amperage draw on each heat strip, look for loose or corroded terminals, inspect the blower and check the filter. On gas furnaces, we also look at ignition, the flame sensor and venting.
Before we start any work, we tell you what failed and what fixing it involves. If you live in a condo or apartment building, let us know about any building access rules when you book so the visit goes smoothly.
Repair or Replace?
Most heating problems come down to a single part, and a repair is the sensible fix. If your system is older, needs frequent repairs or also struggles to keep up with cooling, it may make sense to talk about replacement. A heat pump handles both heating and cooling in one system.
Florida Power & Light runs a Residential HVAC program with rebates on qualifying high-efficiency heat pumps and central air conditioners, paid through participating contractors at installation. We confirm the current terms before quoting them. The federal 25C tax credit for heat pumps ended for systems placed in service after 2025, so it doesn't apply to new installations now.
